Torsion Springs – Wholesale & Custom

Torsion springs are a type of flat spiral coil or helical-shaped springs used in applying torque or storing rotational energy. Unlike other springs such as compression or extension springs that require a linear force to push or pull, torsion springs store and release rotational energy via torque as a measure of force. Torque causes the spring to rotate on its axis while resisting or applying a load. So we think of torque as the rotational equivalent of the linear force driving the compression and extension springs.

This type of spring is normally a close wound but can have a pitch to reduce friction between the coils. They provide resistance to forces applied by rotation or twisting. Torsion springs can be designed to work in a counter-clockwise or clockwise rotation, thus determining the direction of the wind depending on the application.

KENENG can custom torsion springs according to drawings or samples, and we can also wholesale large quantities of torsion springs.

Advantages of torsion springs manufactured by KENENG

The torsion springs produced by KENENG has high strength, good plasticity and toughness, excellent surface state, strict size and accuracy, sufficient elasticity, high fatigue strength, can withstand long-term alternating load, and also has corrosion resistance, heat resistance, low temperature resistance, constant elasticity, non-magnetic and good conductivity.

KENENG’s engineers can customize torsion springs according to customers’ samples or drawings to produce products that meet customers’ specific use needs. If you don’t know which specification or material is more suitable for your application, our engineers can give you the best suggestions and solutions.